Scanning from a computer (Windows)

The following procedure uses Windows XP and PageManager as an example.

The procedure may vary depending on PageManager's version. For details, see the manual for PageManager.

1. Place the original on the exposure glass or in the ADF.

2. On the [Start] menu, point to [All Programs], point to [Presto! PageManager X.XX], and then click [Presto! PageManager X.XX].

   "X.XX" indicates the version of PageManager.

3. On the [File] menu, click [Select Source...].

4. In the [Select Source] dialog box, select the scanner, and then click [OK].

5. On the [Tool] menu, click [Scan Settings...].

6. Configure the scan settings as required, and then click [OK].

   For details, see the TWAIN driver Help or the manual for PageManager.

7. On the [File] menu, click [Acquire Image Data...].

8. On the [File] menu, click [Exit].

   

   • If there are two or more scanners on the network, make sure you have selected the correct scanner. If you have not, click [Select Source...] on the [File] menu, and select the scanner again.

   • You can use the launcher installed with PageManager to perform the following scan operations easily. For more details, see the manual for PageManager.

     • Scanning originals into another application.

     • Passing the scanned files to an OCR application.

     • Passing the scanned files to an email application to send as attachments.

     • Saving the scanned files in a preset folder.

   • The machine supports WIA scanning, an additional method of scanning originals from your computer, for USB connection. WIA scanning is possible if your computer is running a WIA-compatible application. For more information, see the manual for your application.