Making 2-sided Copies Manually (Type 1 model)

This section describes how to make 2-sided copies manually.

Place the odd-numbered pages of the original in the ADF.
Press the [Copy] key.
Press the [Start] key.
Sort the output paper in reverse order.
Load the output paper into the current tray.
If using tray 1 or tray 2, reload the paper with the blank side down; if using the bypass tray, blank side up.
Make sure to load paper with the top and bottom sides oriented correctly to avoid misprints.
Place the even-numbered pages of the original in the ADF.
Press the [Start] key.
- When making 2-sided copies, confirm which tray is used to feed paper from for making copies, by checking the [Paper Select] setting under [Copy Settings].
- If the [Auto Clear] setting is enabled, temporary job settings may be cleared during the operation. Make sure to reconfigure the settings if they are cleared.
- To place the original, see Placing Originals.
- To load paper in the trays, see Loading Paper.
- For details about [Paper Select], see Copy Settings.
- For details about [Auto Clear], see Administrator Settings.