Installing the PostScript 3 Printer Driver
Before installing the PostScript 3 printer driver, print the test page to obtain the printer's IP address. For details, see Printing a test page
.To install this printer driver, you must have an account that has Manage Printers permission. Log on as an Administrators group member.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
Click [PostScript 3 Printer Driver].
The Add Printer Wizard starts.
Click [Next >].
Click [Local printer], and then click [Next >].
In a Windows Vista and Windows Server 2008 environment, click [Add a local printer].
Click [Create a new port].
Click [Standard TCP/IP Port], and then click [Next >].
The [Add Standard TCP/IP Printer Port Wizard] dialog box appears.
Click [Next >].
Enter the printer's IPv4 address in the [Printer Name or IP Address] box, and then click [OK].
The IPv4 address you enter here is the address you have checked on the test page.
In a Windows Vista and Windows Server 2008 environment, make the following settings in the dialog box that appears, and then click [Next >].
In [Device Type] list, select an item.
You can select [Autodetect], [TCP/IP Device], or [Web Services Device].
Enter an IP address in the [Hostname or IP address:] box.
If necessary, enter a port name in the [Port name] box.
If a screen prompting you to specify [Device Type] appears, select the model of your printer, and then click [Next >].
Click [Finish].
Check that the name of this printer whose driver you want to install is selected, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Specify whether or not to share this printer, and then click [Next >].
Specify whether or not to print a test page, and then click [Next >].
Click [Finish].
The printer driver installation starts.
When you click [Finish], the [Digital Signature Not Found] dialog box may appear. To continue the installation, click [Yes].
Auto Run might not work under certain operating system settings. If this is the case, launch “Setup.exe” from the CD-ROM root directory.
The printer driver in the selected language will be installed.
To stop the selected software installation, click [Cancel] before the installation is complete.
For details about checking the printer's IP address, see Printing a test page
.For details about reconfiguring the printer settings when the network printer search fails, see If the network printer search fails
.
