Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Appendix > Moving and Transporting the Printer > Moving the printer in a short distance

Moving the printer in a short distance

Important

  1. Be sure to check the following points:

    • The power switch is turned off.

    • The power cable is unplugged from the wall outlet.

    • The interface cable is unplugged from the printer.

  2. If tray 2 is installed, remove it.

  3. Lift the printer by using the inset grips on both sides of the printer, and then move it horizontally to the place where you want to use it.

    image

  4. If you have removed tray 2, reinstall it.

    Note

    • Be sure to hold the printer level while carrying it. To prevent toner from spilling, move the printer carefully.

TopPreviousNext
Copyright (C) 2009