首页 > 网络和系统设置指南 > 监控和配置打印机 > 通过telnet进行远程维护 > etherconfig
使用“etherconfig”命令可查看和配置以太网参数。
查看设置
msh> etherconfig
指定以太网速度
msh> etherconfig speed {auto|10f|10h|100f|100h}
auto = 自动选择
10f = 10 Mbps全双工
10h = 10 Mbps半双工
100f = 100 Mbps全双工
100h = 100 Mbps半双工
默认值为“auto”。