ManualsContentsPreviousNext |
This section describes how to add and store toner.
|
|
|
|
|
|
|
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Always add toner when the machine instructs you.
Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
Do not shake the removed toner cartridge. Remaining toner might scatter.
You can still make about fifty copies after the messages "Toner Cartridge is almost empty." and "Replace Toner Cartridge." appear cyclically, but replace toner soon to prevent poor copy quality.
You can check name of the required toner name and the replacement procedure using the "Add Toner" screen.
Press [System Status] to check contact number where you can order supplies. See "Checking Machine Status and Settings".