Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Scanner Reference > Various Scan Settings > Scanning Multiple Pages of Originals as One File

Scanning Multiple Pages of Originals as One File

This section explains the procedure for sending multiple originals as a multi-page file or storing them as a single stored file.

Important

  1. Press [Original Feed Type].

  2. Select [Batch] or [SADF].

    To scan originals using the exposure glass, select [Batch]. To scan originals using the ADF, select [SADF]. For detail about [Batch] and [SADF], see "Batch, SADF".

    Operation panel screen illustration

  3. Press [OK].

  4. Place originals.

  5. Make settings for sending by e-mail or Scan to Folder, delivering, or storing.

  6. Press the [Start] key to scan originals.

    If [Batch] is selected, place additional originals, and then press the [Start] key.

    If [SADF] is selected, scanning starts automatically when you place additional originals.

    Repeat this step until all originals are scanned.

  7. After all originals are scanned, press the [Sharp] key.

    Storing or transmission starts.

    Note

    • If [Batch] is selected, originals can be scanned using the ADF.

    • When scanning originals using the exposure glass, depending on the settings for [Wait Time for Next Orig.: Exposure Glass] under [Scanner Features], the machine can wait for additional originals even if [Batch] is not selected in [Original Feed Type]. For details about [Wait Time for Next Orig.: Exposure Glass], see "Scanner Features", General Settings Guide.

    • If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.: Exposure Glass] or [Wait Time for Next Original(s): SADF], place additional originals within the specified time. When the countdown ends, transmission or storage starts automatically. To start transmission or storage before the countdown is completed, press the [Sharp] key. Countdown is canceled if Scan Settings or other settings are changed in the meantime. Place additional originals, and then press the [Start] key. The machine scans the originals and the countdown is resumed. For details about [Wait Time for Next Orig.: Exposure Glass] and [Wait Time for Next Original(s): SADF], see "Scanner Features", General Settings Guide.

    • If [SADF] is selected, scanning from the exposure glass is enabled after scanning from the ADF. If this happens, you must press the [Start] key to start scanning.

    Reference

TopPreviousNext
Copyright (C) 2009