Skip headerimage
ManualsContentsPreviousNextHelp

Windows XP, Windows Server 2003/2003 R2 - USB

Important

When USB is first used, Found New Hardware Wizard starts, and USB Printing Support is installed automatically.

If the printer driver is already installed and plug-and-play is enabled, the icon of the printer connected to the "USB" port appears in the [Printers and Faxes] window.

The printer drivers can be installed from the CD-ROM provided with this machine.

If the printer driver is not already installed, follow the printer's plug-and-play instructions to install it from the provided CD-ROM.

  1. Check that the power of the machine is off.

  2. Connect the machine to the computer using a USB cable.

    Connect the USB cable firmly.

  3. Turn on the power of the machine.

    Found New Hardware Wizard starts, and USB Printing Support is installed automatically.

  4. In the Found New Hardware Wizard window, click [Install the software automatically (Recommended)], and then click [Next >].

  5. Insert the CD-ROM into the CD-ROM drive.

    If Auto Run starts, click [Cancel], and then [Exit].

  6. Select the [Include this location in the search] check box under [Search for the best driver in these location], and then click [Browse] to select the printer driver location.

    If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

    • PCL 5e

      D:DRIVERSPCL5EXP_VISTA(Language)DISK1

    • PCL 6

      D:DRIVERSPCL6XP_VISTAMUIDISK1

    The PCL 6 printer driver is installed in the language specified by your operating system.

  7. Check the printer driver location, and then click [Next >].

  8. Click [Continue].

  9. Click [Finish].

    If the installation is successful, the icon of the printer connected to the "USB001" port appears in the [Printers and Faxes] window.

Note