Copying onto Special Paper

When copying onto special paper such as OHP transparencies, thick paper (postcards, envelopes, etc.), and adhesive label paper, select the type and size of paper.

When setting OHP transparencies, thin paper, or adhesive label paper, Staple, Shift, or Sort cannot be used.
When copying onto OHP transparencies, remove copied sheets one by one.

Open the bypass tray, and then push up the release lever.
Insert the paper face-down until you hear the beep, and then align the paper guides to the paper size.
Push down the release lever.
The bypass tray is automatically selected.
Press the [] key.
Select the paper type in Special Paper.
Specify the paper size, and then press [OK].
Place the originals, and then press the [Start] key.

When copying onto OHP transparencies, use A4 or 8¹/₂ × 11 size sheets, and specify its size.
To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.