



	Manuals Contents Previous Next

Top Page > Copy/Document Server Reference > Basic Copying > Copying from Tray 2 > Using Tray 2 as the Bypass Tray > Copying onto special paper

Copying onto special paper

When copying onto special paper such as OHP transparencies, thick paper (postcards, envelopes, etc.), and adhesive label paper, select the type and size of paper.

The Duplex function cannot be performed on special paper fed from tray 2. If [1 Sided 2 Sided] is selected, cancel the setting.
Select [Thick Paper] if the paper weight is greater than 105 g/m² (28 lb.).

Select tray 2, and then press the [] key.
Select the paper type in Special Paper.
Specify the paper size, and then press [OK].
Place the originals, and then press the [Start] key.

The maximum limit for stacking special paper is different to that for plain paper. See "Recommended Paper Sizes and Types", About This Machine.
When setting OHP transparencies, thin paper, or adhesive label paper, the Staple or Shift Sort functions cannot be used.