Skip header
ManualsContentsPreviousNextHelp

Removing Jammed Paper

This section describes how to locate and remove jammed paper.

CAUTION


  • The inside of the machine could be very hot. Do not touch any parts other than specified in this document when removing misfed paper. Otherwise, it may cause burn injury.

CAUTION


  • The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper.

CAUTION


  • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

CAUTION


  • Keep your hands clear of the inside of the ring binder and the space under the Ring Binder Tray. You might trap your fingers if you do not.

Important

Related topics

Locating Jammed Paper
Removing Jammed Paper
When A1 Is Displayed
When A2 Is Displayed
When A2 Is Displayed in the Case of Wide Large Capacity Tray
When B Is Displayed
When C Is Displayed
When D2 - D4 Is Displayed
When E and D1 Are Displayed
When E and E1 Are Displayed
When F Is Displayed
When Mc1 - Mc4 Is Displayed
When Mc5 or Mc6 Is Displayed
When Mc7 or Mc8 Is Displayed
When N1 - N5 Is Displayed
When N6 - N22 Is Displayed
When P1 Is Displayed
When P2 Is Displayed
When Q Is Displayed in the Case of Interposer
When Q1 - Q4 Is Displayed in the Case of Twin Interposer
When R1 - R4 Is Displayed in the Case of Finisher SR4030
When R5 - R8 Is Displayed in the Case of Finisher SR4030
When R1 - R4 Is Displayed in the Case of Finisher SR4040
When R5 - R7 Is Displayed in the Case of Finisher SR4040
When R8 - R12 Is Displayed in the Case of Finisher SR4040
When R1 - R3 Is Displayed in the Case of Finisher SR 5000
When R4 - R8 Is Displayed in the Case of Finisher SR 5000
When U Is Displayed in the Case of Large Capacity Tray
When U Is Displayed in the Case of Wide Large Capacity Tray
When W Is Displayed