If the paper fed to the output tray is still not aligned

If Z-folded sheets are not output in proper alignment even when the Z-fold support tray for multi-folding unit (Large) is attached, attach the Z-fold support tray for multi-folding unit (Small) as well.

Open the front cover of the multi-folding unit and remove both Z-fold support trays (located at the bottom of the multi-folding unit).
Insert the projecting part of the small Z-fold support tray into the rectangular hole of the large Z-fold support tray.
A) Z-fold support tray for the multi-folding unit (Small)
B) Projecting part
C) Rectangular hole
D) Z-fold support tray for the multi-folding unit (Large)
Position both Z-fold support trays flush against the end fence in the slope of the multi-folding unit tray.

When you have finished with the Z-fold support trays, open the front cover of the multi-folding unit and hang them back up on the stowage hook.
Be sure to put the Z-fold support tray for the multi-folding unit (Small) on the hook first.