Pausing Copy When Using the Finisher SR5000
Use the following procedure to temporarily interrupt a long copy run when using the Finisher SR5000.
Press the [Suspend/Resume] key.
The key lights up, and printing stops.
Remove the stack of paper from the finisher shift tray.
Press the [Suspend/Resume] key.
The key turns off, and then copying restarts.
You can suspend copy only when the output tray is specified as the finisher shift tray.
Depending on the print image, the prints might not be stacked properly. In such a case, pause printing, remove the prints, and then resume printing.
