ManualsContentsPreviousNext |
The following is an overview of the settings that are available using the [Finishing], [Paper], and [Effects] menus in the [Menu:] area.
The PCL 6 printer driver's menus are shown as examples. For details about the PCL 5c printer driver, see the printer driver Help.
Finishing menu
You can enable/disable collate, staple, punch, and fold function.
Collate
When printing multiple sets of documents such as handouts for meetings, you can have prints delivered in batches of ordered sets.
Staple
With an optional finisher installed, sets can be stapled individually when printing multiple sets.
Punch
With an optional finisher and punch unit installed, holes can be punched into printed outputs.
Fold
With an optional Finisher SR5000 or Finisher SR4040, and an optional Multi-Folding Unit installed, output can be folded.
Ring Binding
With an optional Ring Binder and Finisher SR5000 installed, output can be ring bound or punched.
Paper menu
You can enable/disable the collate function.
Front Cover sheet/ Back Cover sheet
Using this function, you can insert cover sheet/ back cover sheet fed from a different tray to that of the main paper, and print on them.
Chapter Page
Using this function, you can have specified pages always printed on the same side as the first page, or have chapter slip sheets inserted before specified pages.
Slip Sheet
A slip sheet can be inserted between each page.
Tab stock printing
Printing on tab stock is possible if the optional tab stock fence is installed.
Effects menu
Watermarks
This function increases a document's security and identifiability by embedding a specified text (watermark) on every page.