Windows Vista, Windows Server 2008 - USB

Manage Printers permission is required to install the drivers. Log on as an Administrators group member.

If the printer driver has already been installed, and plug and play is enabled, the icon of the machine connected to the "USB" port is added to the [Printers] window.

The printer drivers can be installed from the CD-ROM provided with this machine.

If the printer driver is not installed, follow the plug-and-play instructions of the machine to install it from the CD-ROM provided with this machine.

Check that the power of the machine is off.
Connect the machine and computer using a USB cable.
Connect the USB cable firmly.
Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
In the Found New Hardware Wizard window, click [Locate and install driver software (recommended)], and then click [Next >].
Click [Continue] if the [User Account Control] window appears.
Insert the CD-ROM into the CD-ROM drive.
If Auto Run starts, click [Cancel], and then [Exit].
Check that the name of the machine whose driver you want to install is selected, and then click [Next >].
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this driver software anyway].
Click [Close].
If the installation is successful, the icon of the machine connected to the "USB001" port is added to the [Printers] window.

To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.
The number after "USB" varies depending on the number of printers connected.