Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This section describes the user tools in the Tray Paper Settings menu under System Settings.
If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
Default: [Tray 1]
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
Default: [Tray 1]
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
Default: [Tray 1]
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the computer.
The paper sizes you can set for bypass tray are as follows:
[Auto Detect]
A3
, A4
, A4, A5, A5, A6, B4 JIS, B5 JIS,
B5 JIS, B6 JIS, 12 × 18, 11 × 17, 81/2 × 14, 81/2 × 13,
81/2 × 11, 81/2 × 11, 81/4 × 13, 8 × 13, 71/4 × 101/2, 71/4 × 101/2,
51/2 × 81/2
[Custom Size]
: Default: [A4]
/
: Default: [81/2 × 11]
You can specify a custom size of between 100.0 - 305.0 mm (3.94 - 12.00 in.) vertically, and between 148.0 - 457.2 mm (5.83 - 18.00 in.) horizontally.
When prints are delivered to the finisher shift tray of the Finisher SR5000, vertical size is between 139.0 - 305.0 mm (5.48 - 12.00 in.).
For details about auto detect paper size, see About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Tray Paper Size: Tray 2 - 3
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 2 - 3 are as follows:
[Auto Detect]
A3, B4 JIS, A4, A4, B5 JIS, B5 JIS, A5, A5,
210 × 340mm, 170 ×210mm, 12 × 18, 11 × 17, 11 × 15,
11 × 14, 10 × 15, 81/2 × 14, 81/2 × 13, 81/2 × 11,
81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2,
71/4 × 101/2, 51/2 × 81/2, 51/2 × 81/2, 8K, 16K, 16K
Default: [Auto Detect]
For details about auto detect paper size, see About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Both the main and sub-machines should have the same paper tray settings. Only paper trays with the same size, orientation and paper type of paper can be used in Connect Copy mode.
Tray Paper Size: LCT
Select the size of the paper loaded in the optional Wide LCT.
This menu appears only when the optional Wide LCT is installed.
The paper guide for the optional LCT is fixed. If you need to change the paper size, contact your service representative.
The paper sizes you can set for Wide LCT are as follows:
[Auto Detect]
: A3, A4, A4, A5, A5, A6, B4 JIS,
B5 JIS, B5 JIS, B6 JIS, 210 × 340mm, 182 × 210mm,
182 × 210mm, 170 × 210mm, 170 × 210mm, 12 × 18,
11 × 17, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 14,
81/2 × 13, 81/2 × 11, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13,
8 × 101/2, 8 × 101/2, 8 × 10, 8 × 10, 71/4 × 101/2,
71/4 × 101/2, 51/2 × 81/2, 51/2 × 81/2, 8K, 16K, 16K
/ : 12 × 18, 11 × 17, 11 × 15, 11 × 14,
10 × 15, 10 × 14, 81/2 × 14, 81/2 × 13, 81/2 × 11,
81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 101/2,
8 × 10, 8 × 10, 71/4 × 101/2, 71/4 × 101/2, 51/2 × 81/2,
51/2 × 81/2, A3, A4, A4, A5, A5, A6, B4 JIS,
B5 JIS, B5 JIS, B6 JIS, 210 × 340mm, 182 × 210mm,
182 × 210mm, 170 × 210mm, 170 × 210mm
Default: [Auto Detect]
To use a custom size paper on this tray, contact your service representative.
For details about auto detect paper size, see About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Both the main and sub-machines should have the same paper tray settings. Only paper trays with the same size, orientation and paper type of paper can be used in Connect Copy mode.
Tray Paper Size: Interposer Upper Tray
Select the size of the paper loaded in the interposer upper tray.
This menu appears only when the optional twin interposer is installed.
The paper sizes you can set for interposer upper tray are as follows:
[Auto Detect]
: A3, A4, A4, A5, A5, B4 JIS,
B5 JIS, B5 JIS, 210 × 340mm, 182 × 210mm, 182 × 210mm,
170 × 210mm, 170 × 210mm, 12 × 18, 11 × 17, 11 × 15,
11 × 14, 10 × 15, 10 × 14, 81/2 × 14, 81/2 × 13,
81/2 × 11, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2,
8 × 101/2, 8 × 10, 8 × 10, 71/4 × 101/2, 71/4 × 101/2, 51/2 × 81/2, 51/2 × 81/2, 8K, 16K, 16K
/ : 12 × 18, 11 × 17, 11 × 15, 11 × 14,
10 × 15, 10 × 14, 81/2 × 14, 81/2 × 13, 81/2 × 11,
81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 101/2,
8 × 10, 8 × 10, 71/4 × 101/2, 71/4 × 101/2, 51/2 × 81/2,
51/2 × 81/2, A3, A4, A4, A5, A5, B4 JIS,
B5 JIS, B5 JIS, 210 × 340mm, 182 × 210mm,
182 × 210mm, 170 × 210mm, 170 × 210mm
Default: [Auto Detect]
For details about auto detect paper size, see About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Tray Paper Size: Interposer Lower Tray
Select the size of the paper loaded in the interposer lower tray.
This menu appears only when the optional twin interposer is installed.
The paper sizes you can set for interposer lower tray are as follows:
[Auto Detect]
: A3, A4, A4, A5, A5, B4 JIS,
B5 JIS, B5 JIS, 210 × 340mm, 182 × 210mm, 182 × 210mm,
170 × 210mm, 170 × 210mm, 12 × 18, 11 × 17, 11 × 15,
11 × 14, 10 × 15, 10 × 14, 81/2 × 14, 81/2 × 13,
81/2 × 11, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2,
8 × 101/2, 8 × 10, 8 × 10, 71/4 × 101/2, 71/4 × 101/2, 51/2 × 81/2, 51/2 × 81/2, 8K, 16K, 16K
/ : 12 × 18, 11 × 17, 11 × 15, 11 × 14
10 × 15, 10 × 14, 81/2 × 14, 81/2 × 13, 81/2 × 11,
81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 101/2,
8 × 10, 8 × 10, 71/4 × 101/2, 71/4 × 101/2, 51/2 × 81/2,
51/2 × 81/2, A3, A4, A4, A5, A5, B4 JIS,
B5 JIS, B5 JIS, 210 × 340mm, 182 × 210mm,
182 × 210mm, 170 × 210mm, 170 × 210mm
Default: [Auto Detect]
For details about auto detect paper size, see About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
[Do not Display], [Recycled Paper], [Colour Paper 1], [Colour Paper 2], [Letterhead], [Label Paper], [Translucent Paper], [Prepunched Paper], [OHP (Transparency)], [Special Paper 1], [Special Paper 2], [Tab Stock]
The paper thicknesses you can set for the bypass tray are as follows:
[Thin Paper] 52 - 65 g/m2 (14 - 17 lb. Bond)
[Plain Paper 1] 66 - 80 g/m2 (18 - 20 lb. Bond)
[Plain Paper 2] 81 - 100 g/m2 (20 - 24 lb. Bond)
[Middle Thick] 101 - 127 g/m2 (28 - 34 lb. Bond)
[Thick Paper 1] 128 - 169 g/m2 (34 lb. Bond - 92 lb. Index)
[Thick Paper 2] 170 - 249 g/m2 (65 - 90 lb. Cover)
[Thick Paper 3] 250 - 300 g/m2 (140 lb. Index - 110 lb. Cover)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
When "Tab stock" is selected in the paper type, the tab position can be set between 0 and 15 mm (0.0 - 0.6 in.) in 1mm (0.1 in.) increments by using [
] [
].
Default: [13 mm (0.5 in.)]
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
In connect copy, the bypass tray can only be used with the Covers and Chapter functions.
Paper Type: Tray 1
Sets the display so you can see what type of paper is loaded in the paper tray 1.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 1 are as follows:
[Do not Display], [Recycled Paper], [Colour Paper 1], [Colour Paper 2], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Special Paper 1], [Special Paper 2]
The paper thicknesses you can set for the paper tray 1 are as follows:
[Thin Paper] 52 - 65 g/m2 (14 - 17 lb. Bond)
[Plain Paper 1] 66 - 80 g/m2 (18 - 20 lb. Bond)
[Plain Paper 2] 81 - 100 g/m2 (20 - 24 lb. Bond)
[Middle Thick] 101 - 127 g/m2 (28 - 34 lb. Bond)
[Thick Paper 1] 128 - 169 g/m2 (34 lb. Bond - 92 lb. Index)
[Thick Paper 2] 170 - 249 g/m2 (65 - 90 lb. Cover)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
The key mark is displayed next to the paper tray if [No] is selected in "Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.
Paper Type: Tray 2
Sets the display so you can see what type of paper is loaded in the paper tray 2.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 2:
[Do not Display], [Recycled Paper], [Colour Paper 1], [Colour Paper 2], [Letterhead], [Prepunched Paper], [Special Paper 1], [Special Paper 2], [Tab Stock]
The paper thicknesses you can set for the paper tray 2 are as follows:
[Thin Paper] 52 - 65 g/m2 (14 - 17 lb. Bond)
[Plain Paper 1] 66 - 80 g/m2 (18 - 20 lb. Bond)
[Plain Paper 2] 81 - 100 g/m2 (20 - 24 lb. Bond)
[Middle Thick] 101 - 127 g/m2 (28 - 34 lb. Bond)
[Thick Paper 1] 128 - 169 g/m2 (34 lb. Bond - 92 lb. Index)
[Thick Paper 2] 170 - 249 g/m2 (65 - 90 lb. Cover)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
When "Tab stock" is selected in the paper type, the tab position can be set between 0 and 15 mm (0.0 - 0.6 in.) in 1mm (0.1 in.) increments by using [] [].
Default: [13 mm (0.5 in.)]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.
Paper Type: Tray 3
Sets the display so you can see what type of paper is loaded in the paper tray 3.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 3:
[Do not Display], [Recycled Paper], [Colour Paper 1], [Colour Paper 2], [Letterhead], [Prepunched Paper], [Special Paper 1], [Special Paper 2], [Tab Stock]
The paper thicknesses you can set for the paper tray 3 are as follows:
[Thin Paper] 52 - 65 g/m2 (14 - 17 lb. Bond)
[Plain Paper 1] 66 - 80 g/m2 (18 - 20 lb. Bond)
[Plain Paper 2] 81 - 100 g/m2 (20 - 24 lb. Bond)
[Middle Thick] 101 - 127 g/m2 (28 - 34 lb. Bond)
[Thick Paper 1] 128 - 169 g/m2 (34 lb. Bond - 92 lb. Index)
[Thick Paper 2] 170 - 249 g/m2 (65 - 90 lb. Cover)
[Thick Paper 3] 250 - 300 g/m2 (140 lb. Index - 110 lb. Cover)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
When "Tab stock" is selected in the paper type, the tab position can be set between 0 and 15 mm (0.0 - 0.6 in.) in 1mm (0.1 in.) increments by using [] [].
Default: [13 mm (0.5 in.)]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.
Paper Type: LCT (When LCT is installed.)
Sets the display so you can see what type of paper is loaded in the LCT.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the LCT are as follows:
[Do not Display], [Recycled Paper], [Colour Paper 1], [Colour Paper 2], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Special Paper 1], [Special Paper 2]
The paper thicknesses you can set for the LCT are as follows:
[Thin Paper] 52 - 65 g/m2 (14 - 17 lb. Bond)
[Plain Paper 1] 66 - 80 g/m2 (18 - 20 lb. Bond)
[Plain Paper 2] 81 - 100 g/m2 (20 - 24 lb. Bond)
[Middle Thick] 101 - 127 g/m2 (28 - 34 lb. Bond)
[Thick Paper 1] 128 - 169 g/m2 (34 lb. Bond - 92 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.
Paper Type: LCT (When Wide LCT is installed.)
Sets the display so you can see what type of paper is loaded in the Wide LCT.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the Wide LCT are as follows:
[Do not Display], [Recycled Paper], [Colour Paper 1], [Colour Paper 2], [Letterhead], [Label Paper], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [OHP (Transparency)], [Special Paper 1], [Special Paper 2], [Tab Stock]
The paper thicknesses you can set for the Wide LCT are as follows:
[Thin Paper] 52 - 65 g/m2 (14 - 17 lb. Bond)
[Plain Paper 1] 66 - 80 g/m2 (18 - 20 lb. Bond)
[Plain Paper 2] 81 - 100 g/m2 (20 - 24 lb. Bond)
[Middle Thick] 101 - 127 g/m2 (28 - 34 lb. Bond)
[Thick Paper 1] 128 - 169 g/m2 (34 lb. Bond - 92 lb. Index)
[Thick Paper 2] 170 - 249 g/m2 (65 - 90 lb. Cover)
[Thick Paper 3] 250 - 300 g/m2 (140 lb. Index - 110 lb. Cover)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
When "Tab stock" is selected in the paper type, the tab position can be set between 0 and 15 mm (0.0 - 0.6 in.) in 1mm (0.1 in.) increments by using [] [].
Default: [13 mm (0.5 in.)]
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and [Recycled Paper] are selected. If [No] is selected, Apply Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Paper size, orientation, and type settings that match those currently made on both the main and sub-machines can be used for connect copy. To get the most from the connect copy function, we recommend you make the same paper settings on both the main and sub-machines.
Front Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, front cover sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Back Cover Sheet Tray
Specify which paper tray you want to load the back covers from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, back cover sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Slip Sheet Tray
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Designation Sheet 1 Tray, Designation Sheet 2 Tray
Specify which paper tray you want to load the chapter division sheets from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, designation sheet 1 tray or designation sheet 2 tray settings only appear when the cover function, slip sheet function or designation sheet tray is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Separation Sheet Tray
You can specify and display the paper tray that is used for setting separation sheets.
You can also specify the display timing and copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, separation sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
Paper Type Detect
You can specify whether or not the machine automatically detects the paper type ([Thin Paper], [Plain Paper 1], [Plain Paper 2], [Middle Thick], [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], [Translucent Paper], or [OHP (Transparency)]). If detection is enabled and the paper type that is loaded differs from the detected paper type, a warning message appears. Press the [Clear/Stop] key, remove paper from inside the machine and configure new paper settings correctly or change paper.
Default for "Bypass Tray": [On]
Default for "Tray 1": [On]
Default for "Tray 2": [On]
Default for "Tray 3": [On]
Default for "LCT": [On]
Some paper types cannot be detected.
Depending on the paper type, the machine reports a warning message even though a proper paper type is loaded. In this case, specify [Off] for this setting.
If you select duplex copying, the paper type of the backs of originals cannot be detected.
[Bypass Tray] is not displayed when Wide LCT is installed.
[LCT] is displayed only when LCT or Wide LCT is installed.
[Paper Type Detect] works only if you select [Do not Display], [Recycled Paper], [Translucent Paper], or [OHP (Transparency)] in [Paper Type:] in System Settings.
The machine also detects the paper type automatically if you specify the optional Wide LCT for Type2 and specify [Special Paper 2] as the paper type.
The following paper types cannot be detected or may not be detected properly:
Printed paper or copies
Colored paper
Preprinted paper
Bent, folded, or creased paper
Paper with holes
Smudged, damaged, or torn paper
Back of paper
Batch of more than one paper type
Sheets shorter than 160 mm (only if loaded in the bypass tray)
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
Double Feed Detect
You can specify whether or not the machine stops if more than one sheet of [Thin Paper], [Plain Paper 1], [Plain Paper 2], [Middle Thick], [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], [Translucent Paper], or [OHP (Transparency)] has fed in at the same time. If double feeds occur, the machine stops operating as if misfeed has occurred. Remove paper from the tray and fan it thoroughly before resetting it in the tray.
Default for "Bypass Tray": [On]
Default for "Tray 1": [On]
Default for "Tray 2": [On]
Default for "Tray 3": [On]
Default for "LCT": [On]
With certain paper types, double feeds cannot be detected.
Depending on the paper type, the machine may detect double feeds even though they have not actually occurred. In this case, specify [Off] for this setting.
If you select duplex copying, the paper type of the backs of originals cannot be detected.
[Bypass Tray] is not displayed when Wide LCT is installed.
[LCT] is displayed only when LCT or Wide LCT is installed.
[Double Feed Detect] works only if you select [Do not Display], [Recycled Paper], [Translucent Paper], or [OHP (Transparency)] in [Paper Type:] in System Settings.
The machine also detects the paper type automatically if you specify the optional Wide LCT for Type2 and specify [Special Paper 2] as the paper type.
The following paper types cannot be detected or may not be detected properly:
Printed paper or copies
Colored paper
Preprinted paper
Bent, folded, or creased paper
Paper with holes
Smudged, damaged, or torn paper
Back of paper
Batch of more than one paper type
Sheets shorter than 160 mm (only if loaded in the bypass tray)
The main machine applies the setting that has been made on it. Sub-machines also apply their own respective settings.
For details on how to access System Settings, see "Accessing User Tools".
 |
 | Copyright (C) 2009 |
