



	Manuals Contents Previous Next

Top Page > About This Machine > Adding Toner, Staples, and Ring Combs > Adding Staples

Adding Staples

This section describes what to do when staples need replacing.

When closing the finisher, keep hands clear of the finisher's upper surface.

Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

Stapling failures or jams may occur if you use a staple cartridge other than that recommended.

If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the staples, and do not add more.
Refill the stapler according to the finisher type. (Check the type if you are unsure.) For details about type of finisher, see "Options".

Options

Related topics

Adding Staples to Finisher SR4030
Adding Staples to Finisher SR4040
Adding Staples to Finisher SR4040 (Saddle Stitch)
Adding Staples to Finisher SR5000