![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes how to add and store toner.
|
|
|
|
|
|
|
Always add toner when the machine instructs you.
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Do not use recycled toner. This will damage the machine.
Store toner containers in a cool, dry place free from direct sunlight.
Store toner on a flat surface.
If the message "Check toner cartridge replacement(s)." appears, the toner has almost run out. Have a replacement toner cartridge at hand.
If appears when there is still toner in the cartridge, hold the cartridge with the opening upward, shake it well, and then reinstall it.
You can check the name of the required toner and the replacement procedure using the "Add Toner" screen.
Press [System Status] to check contact number where you can order supplies. See "Checking Machine Status and Settings", Troubleshooting.
You can still make about 10 to 600 copies after appears, but replace the toner early to prevent poor copy quality.
You can add all four color toners in the same way.