Guide to Components

Front view

1. ADF

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one. This ADF can be used for two-sided originals.

2. Copy tray guide

   When copying or printing onto OHP transparencies and translucent paper, raise the guide to prevent output paper from curling when delivered.

3. Copy tray (optional)

   Copied/printed paper and fax messages are delivered here.

4. Main power switch

   If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on. See "Turning On/Off the Power".

5. Operation switch

   Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the operation switch indicator goes off). See "Turning On/Off the Power".

6. Control panel

   See "Control Panel".

7. Front cover

   Open to access the inside of the machine.

8. Exposure glass

   Place originals face down here.

9. Paper trays (Trays 1 - 3)

   Load paper here. Tray 1 is a tandem tray where paper on the left side automatically moves to the right when paper there has run out.

Rear left view

1. Ventilation holes

   Prevent overheating.

2. Bypass tray

   Use to copy or print on OHP transparencies, label paper (adhesive labels), translucent paper, envelopes and custom size paper.

Rear right view

1. Ventilation holes

   Prevent overheating.