Reproduction Ratio

You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display.

You can also change registered Reduce/Enlarge ratios.

When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25 to 400%, using the number keys.

Default for "F1": [71%] (Metric version) / [73%] (Inch version)

Default for "F2": [141%] (Metric version) / [155%] (Inch version)

Default for "F3": [93%]

The main machine applies the settings that have been made on it. Sub-machine settings do not affect connect copy.

You can specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the copier screen.

• Metric version

  • 25%

  • A3 A5, 8 × 13 A5 (50%)

  • A3 8 × 13 (65%)

  • A3 A4, A4 A5 (71%)

  • B4 JIS 8 × 13 (75%)

  • 8 × 13 A4, B4 JIS A4 (82%)

  • 93%

  • B4 JIS A3 (115%)

  • 8 × 13 A3, A4 B4 JIS (122%)

  • A4 A3, A5 A4 (141%)

  • A5 A3 (200%)

  • 400%

  • User Reduce/Enlarge Ratio (25-400%)

• Inch version

  • 25%

  • 11 × 17 5¹/₂ × 8¹/₂ (50%)

  • 11 × 17 8¹/₂ × 11 (65%)

  • 11 × 15 8¹/₂ × 11 (73%)

  • 8¹/₂ × 14 8¹/₂ × 11 (78%)

  • 8¹/₂ × 13 8¹/₂ × 11 (85%)

  • 93%

  • 8¹/₂ × 14 11 × 17 (121%)

  • 8¹/₂ × 11 11 × 17 (129%)

  • 5¹/₂ × 8 ¹/₂ 8¹/₂ × 14 (155%)

  • 5¹/₂ × 8 ¹/₂ 11 × 17 (200%)

  • 400%

  • User Reduce/Enlarge Ratio (25-400%)

The main machine applies the settings that have been made on it. Sub-machine settings do not affect connect copy.

You can set the ratio with priority when [Reduce / Enlarge] is pressed.

Default: [71%] (Metric version) / [65%] (Inch version)

The main machine applies the settings that have been made on it. Sub-machine settings do not affect connect copy.

You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.

Enter a ratio using number keys (in the range of 90 to 99%).

Default: [93%]

The main machine applies the settings that have been made on it. Sub-machine settings do not affect connect copy.