![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
You can insert a blank designation sheet before or after a specified page.
Before using this function, select the tray for designation sheets under Designation Sheet 1 Tray and/or Designation Sheet 2 Tray in Tray Paper Settings. For details, see "System Settings", Network and System Settings Reference.
Press [Cover/Slip Sheet].
Press [Designate / Chapter].
Press [Insert Sheet].
Press the key to select the chapter number.
Select the designation sheet tray that contains the paper for the designation sheets.
Select [Before] to insert slip sheets before the desired page. Select [After] to insert slip sheets after the desired page. Enter the page number with the number keys.
Press [Number of Sheets], and enter the number of sheets you want to insert with the number keys, and the press the [] key.
To specify another location where to insert sheets, repeat steps 4 to 7.
Select the main sheet tray that contains the paper to copy the originals.
After making all settings, press [OK] twice.
The designation sheets should be the same size and orientation as the main sheets.
To change the value you entered, press the key you want to change, and then enter a new value.
For details about the interposer, see "Loading Paper", About This Machine.