Stamp Text
This section describes the user tools in the Stamp Text menu under Stamp.
Font
You can select the font in stamp text mode.
Default: [Font 1]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Size
You can set the stamp text size.
Default: [Auto]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Superimpose
You can have the stamp text printed in white when it overlaps black parts of the image.
Default: [Off]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Color
Sets the selected priority color when printing the text.
Default: [Black]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Setting
Specify how stamp text is printed.
Stamp Position
Specify where to print the Stamp Text.
Default: [Top Right]
Adjust Stamp Position
You can adjust the print position of the Stamp Text within the available ranges as shown below.
Metric version:
“Top Left” - T/B: 4 - 144 mm, L/R: 4 - 144 mm
“Top Center” - T/B: 4 - 144 mm, L/R: 72 - 72 mm
“Top Right” - T/B: 4 - 144 mm, L/R: 4 - 144 mm
“Bottom Left” - T/B: 4 - 144 mm, L/R: 4 - 144 mm
“Bottom Center” - T/B: 4 - 144 mm, L/R: 72 - 72 mm
“Bottom Right” - T/B: 4 - 144 mm, L/R: 4 - 144 mm
Inch version:
“Top Left” - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
“Top Center” - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
“Top Right” - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
“Bottom Left” - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
“Bottom Center” - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
“Bottom Right” - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Default: [All Pages]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
