Preset Stamp

You can select the language of the message printed in Stamp mode.

The default setting is English.

You can select the stamp type given priority when [Preset Stamp] is pressed.

The default setting is Copy.

Specify how each stamp is printed.

• Stamp Position

  Specify where to print the stamp.

  The default setting is Top Right.

• Adjust Stamp Position

  You can adjust the position of the stamp within the available ranges shown below.

  • Metric version:

    "Top Left"T/B: 4-144mm, L/R: 4-144mm

    "Top Center"T/B: 4-144mm, L/R: 72-72mm

    "Top Right"T/B: 4-144mm, L/R: 4-144mm

    "Center Left"T/B: 72-72mm, L/R: 4-144mm

    "Center"T/B: 72-72mm, L/R: 72-72mm

    "Center Right"T/B: 72-72mm, L/R: 4-144mm

    "Bottom Left"T/B: 4-144mm, L/R: 4-144mm

    "Bottom Center"T/B: 4-144mm, L/R: 72-72mm

    "Bottom Right"T/B: 4-144mm, L/R: 4-144mm

  • Inch version:

    "Top Left"T/B: 0.1"-5.7", L/R: 0.1"-5.7"

    "Top Center"T/B: 0.1"-5.7", L/R: 2.8"-2.8"

    "Top Right"T/B: 0.1"-5.7", L/R: 0.1"-5.7"

    "Center Left"T/B: 2.8"-2.8", L/R: 0.1"-5.7"

    "Center"T/B: 2.8"-2.8", L/R: 2.8"-2.8"

    "Center Right"T/B: 2.8"-2.8", L/R: 0.1"-5.7"

    "Bottom Left"T/B: 0.1"-5.7", L/R: 0.1"-5.7"

    "Bottom Center"T/B: 0.1"-5.7", L/R: 2.8"-2.8"

    "Bottom Right"T/B: 0.1"-5.7", L/R: 0.1"-5.7"

• Size

  You can set the size of the stamp.

  The default setting is 1 X.

• Density

  You can set the pattern used to print the stamp.

  The default setting is Normal.

  • Normal

    The stamp is printed on the image. You cannot check which parts will overlap.

  • Lighter

    The image can be seen through the stamp.

  • Lightest

    The image appears even clearer than in the Lighter setting.

• Page to Stamp

  You can have the stamp printed on the first page or all pages.

  The default setting is All Pages.