Skip header
 

Removing Jammed Staples

This section describes how to remove jammed staples.

CAUTION


  • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

Important

  • Curled paper may cause staples to jam. To avoid this, turn paper over in the tray.

  • When the finisher is installed, after removing jammed staples, staples will not be ejected the first few times you try to use the stapler.

Note

  • Remove the jammed staples according to the finisher type. Check the type if you are unsure. For details about type of finisher, see "Appendix", About This Machine.