Skip header
 

Windows Vista, Windows Server 2008 - USB

Important

  • To install a printer driver, you must have Administrators privilege. Log on using an account that has Administrators privilege.

If the printer driver is already installed and plug-and-play is enabled, the icon of the printer connected to the "USB" port appears in the [Printers] window.

The printer drivers can be installed from the CD-ROM provided with this machine.

If the printer driver is not already installed, follow the printer's plug-and-play instructions to install it from the provided CD-ROM.

1Check that the power of the machine is off.

2Connect the machine to the computer using a USB cable.

Connect the USB cable firmly.

3Turn on the power of the machine.

Found New Hardware Wizard starts, and USB Printing Support is installed automatically.

4In the Found New Hardware Wizard window, click [Locate and install driver software (recommended)].

Click [Continue] if the [User Account Control] window appears.

5When a message prompting insertion of the CD-ROM, insert the CD-ROM into the CD-ROM drive.

Installation of the printer driver is automatically started.

If "Windows can't verify the publisher of this software" display appears in the installation, select the [Install this driver software anyway].

6Click [Exit].

If the installation is successful, the icon of the printer connected to the "USB001" port appears in the [Printers] window.

Note

  • To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

  • The number after "USB" varies depending on the number of printers that the computer is connected to.