Interface Settings
Menu |
Description |
---|---|
Machine IPv4 Address |
Specify the machine's IPv4 network address. |
IPv4 Gateway Address |
Specify the gateway address for the router or host computer used as a gateway. |
Machine IPv6 Address |
Displays the machine's IPv6 network address. |
IPv6 Gateway Address |
Displays the machine's IPv6 gateway address. |
IPv6 Stateless Address Autoconfiguration |
Specify IPv6 Stateless Address Autoconfiguration. |
DNS Configuration |
Make settings for the DNS server. |
DDNS Configuration |
Specifies the DDNS settings. |
IPsec |
Specify the machine's IPsec function Active/Inactive. |
Domain Name |
Specifies the domain name. |
WINS Configuration |
Specifies the WINS server settings. |
Effective Protocol |
Select the protocol to use in the network. |
NCP Delivery Protocol |
Select the protocol for NCP delivery: |
NW Frame Type |
Select the frame type when you use NetWare. |
SMB Computer Name |
Specify the SMB computer name. |
SMB Work Group |
Specify the SMB work group. |
Ethernet Speed |
Set the access speed for networks. |
LAN Type |
When you have installed the IEEE 802.11a/g interface unit, select the method of connection. |
Ping Command |
Check the network connection with ping command using given IP address. |
Permit SNMPv3 Communication |
Set the encrypted communication of SNMP v3. |
Permit SSL / TLS Communication |
Set the encrypted communication of SSL/TLS. |
Host Name |
Specify the host name. |
Machine Name |
Specify the machine name. |
Communication Mode |
Specifies the communication mode of the wireless LAN. |
SSID Setting |
Specifies SSID to distinguish the access point in infrastructure mode or 802.11 ad hoc mode. |
Ad-hoc Channel |
Specify the channel to use when [802.11 Ad-hoc Mode] has been selected. Set the channel that matches the type of wireless LAN being used. |
Security Method |
Specifies the encryption of the IEEE 802.11a/g (wireless LAN). |
Wireless LAN Signal |
When using in infrastructure mode, you can check the machine's radio wave status using the control panel. |
Restore Factory Defaults |
You can return the wireless LAN settings to their defaults. |
File Transfer Settings
Menu |
Description |
---|---|
Delivery Option |
Enables or disables sending stored or scanned documents to the ScanRouter delivery server. |
Capture Server IPv4 Address |
Specify the capture server IPv4 address. |
Fax RX File Transmission |
Specify how to deliver fax files received via the different lines. |
SMTP Server |
Specifies the SMTP server name. |
SMTP Authentication |
Specify SMTP authentication (PLAIN, LOGIN, CRAMMD5, DIGEST-MD5). |
POP before SMTP |
Specify POP authentication (POP before SMTP). |
Reception Protocol |
Specify Reception Protocol for receiving Internet Fax. |
POP3 / IMAP4 Settings |
Specify the POP3/IMAP4 server name for receiving Internet faxes. |
Administrator's E-mail Address |
Specify the Administrator's E-mail Address. |
E-mail Communication Port |
Specify the port numbers for receiving Internet faxes. The specified POP3 port number is used for [POP before SMTP]. |
E-mail Reception Interval |
Specify, in minutes, the time interval for receiving Internet faxes via POP3 or IMAP4 server. |
Max. Reception E-mail Size |
Specify the maximum reception e-mail size for receiving Internet faxes. |
E-mail Storage in Server |
Specify whether or not to store received Internet fax e-mails on the POP3 or IMAP4 server. |
Default User Name / Password (Send) |
Specify the user name and password required when sending scan files directly to a shared folder on a computer running Windows, to an FTP server, or to a NetWare server. |
Program / Change / Delete E-mail Message |
You can program, change, or delete the e-mail message used when sending an Internet fax or scan file as an attachment. |
Auto Specify Sender Name |
Set whether or not to specify the name of the sender when sending e-mail. |
Fax E-mail Account |
Specify e-mail address, user name and password for receiving Internet faxes. |
Scanner Resend Interval Time |
Specifies the interval the machine waits before resending a scan file, if it cannot be sent to the delivery server or mail server. |
Number of Scanner Resends |
Sets a maximum number of times a scan file is resent to the delivery server or mail server. |