SNMP
Using the SNMP manager, you can get information about the machine.
The SNMP agent operating on UDP and IPX is incorporated into the built-in Ethernet board and optional IEEE 802.11 interface unit of this machine.
This machine also supports SNMPv3, which increases user authentication, data encryption, and access control security.
To encrypt communication by SNMPv3, you must specify the machine's encrypted password.
If you changed the machine's community name, change the configuration of the connected computer accordingly, using SNMP Setup Tool. For details, see SNMP Setup Tool Help.
The default community names are [public] and [admin]. You can get MIB information using these community names.
Change SNMP setup
Log on to Web Image Monitor in the administrator mode.
In the menu area, click [Configuration].
Click [SNMP] to change the setup.
For details about login user name and password, see Security Reference, which is the administrator's manual.
Depending on the configuration of your Web browser, login user name and password may be saved. If you do not want to save them, configure their settings not to be saved on your Web browser.
For details about the settings, see Web Image Monitor Help.
For details about Web Image Monitor, see “Using Web Image Monitor”.
