This section introduces the names and functions of the components.
Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If the machine overheats, a fault might occur.
Auto document feeder (ADF)
Lower the auto document feeder (ADF) over originals placed on the exposure glass. If you load a stack of originals in the auto document feeder (ADF), the ADF will automatically feed the originals one by one. This document feeder can be used for two-sided originals.
Exposure glass
Place originals here face down.
Operation switch
Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the operation switch indicator goes off).
See “Turning On/Off the Power”.
Control panel
See “Control Panel”.
Duplex unit (Unit for two-sided copies/prints)
Makes two-sided copies/prints.
Front cover
Open to access the inside of the machine.
Paper trays
Load paper here. See “Loading Paper”, Troubleshooting.
Lower paper trays (optional)
Load paper here. See “Options”, and “Loading Paper”, Troubleshooting.
Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on.
See “Turning On/Off the Power”.
Ventilation holes
Prevent overheating.
Internal tray
Copied/printed paper and fax messages are delivered here.
Bypass tray
Use to copy or print onto OHP transparencies, adhesive labels, translucent paper, and custom size paper.
Lower right cover (optional)
Open this cover to remove jammed paper from the optional lower paper trays. See “Options”.
Ventilation holes
Prevent overheating.