Skip header
 

Entering a destination directly

This section explains how to enter a destination manually.

1Click the [Specify Destination] tab.

The [Specify Destination] tab appears.

2Select the type of fax from the [Type:] dropdown menu.

To send by standard fax or IP-Fax, select [Fax]. To send by Internet Fax, select [E-mail].

After you select the fax type, the items corresponding to the selected type appear.

3Specify the destination.

Specify the destination depending on the selected fax type as follows:

  • If you selected [Fax]: enter the fax number. To send by IP-Fax, enter the IP-Fax destination.

  • If you selected [E-mail]: enter the e-mail address.

To enter a pause in the fax number, click [Pause]. If you selected [E-mail] in step 2, [Pause] is not available.

4Specify settings according to the type of fax transmission.

Specify settings according to the type of fax transmission selected in step 2, as follows:

  • If you selected [Fax], select a line or a protocol in the [Line:] list.

  • If you selected [E-mail], select the [Do not use SMTP server] check box if you want to bypass the SMTP server.

5Click [Set as Destination].

The entered destination is added and appears in the [List of Destination:] box.

If you add a destination by mistake, click the wrong destination, and then click [Delete from List].

6To specify more destinations, repeat steps 2 through 5.

Note

  • For details about specifying destinations, see the LAN-Fax Driver's Help.

  • When specifying multiple destinations, if you select different lines, the document is sent using the Simultaneous Broadcast function. For details about the Simultaneous Broadcast function, see “Simultaneous Broadcast Using Multiple Line Ports”.

  • For the maximum number of digits that can be included in a destination, see “Maximum Values”.