Copying onto Special Paper

When copying onto special paper such as OHP transparencies, and thick paper, select the type and size of paper.

When setting OHP transparencies, thin paper, or adhesive label paper, Staple, Shift, or Sort cannot be used.
When copying onto OHP transparencies, remove copied sheets one by one.

Open the bypass tray, and then insert the paper face-down until you hear the beep.
Align the paper guides to the paper size by pinching the clip.
Press [Bypass], and then press the [] key.
Select the paper type in Special Paper.
Specify the paper size, and then press [OK].
Place the originals, and then press the [Start] key.

When copying onto OHP transparencies, use A4 or 8¹/₂ × 11 size sheets, and specify its size.
To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.