This function calculates a reproduction ratio based on the lengths of the original and copy.
Measure and specify the lengths of the original and copy by comparing “A” with “a”.
Press [Reduce / Enlarge].
Press [Size Magnification].
Enter the length of the original with the number keys, and then press [].
You can enter sizes between 1 to 999 mm (0.1 to 99.9 inches) in increments of 1 mm (0.1 inch).
Enter the length of the copy with the number keys, and then press [].
Press [OK] twice.
To change the value you entered, press the key you want to change, and then enter a new value.