Skip header
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Appendix > Printing Files Directly from Windows > Setup

Setup

Follow the procedure below to make network environment settings.

  1. Enable TCP/IP with the control panel, and then set up the printer's network environment about TCP/IP including IP addresses.

    TCP/IP of the printer is set as default.

  2. Install a TCP/IP in Windows to set up the network environment.

    Consult the administrator for the local setting information.

  3. To print under Windows 2000/XP/Vista or Windows Server 2003/2003 R2/2008, install "Printing service for UNIX" as the network application.

    Note

    • For details about setting up IPv4 address, see "Configuration", Hardware Guide.

    • For details about setting the IPv4 address of the printer using DHCP, see "Using DHCP".

    Reference

TopPreviousNext
Copyright (C) 2009