wins

msh> wins

• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP address is the valid address.

msh> wins "interface_name" {on | off}

• {on} means "active" and {off} means "inactive".

• Be sure to specify the interface.

• wlan can be specified only when the wireless LAN interface unit is installed.

  Interface name	Interface configured
  ether	Ethernet interface
  wlan	Wireless LAN interface

Use the following command to configure a WINS server IP address:

msh> wins "interface_name" {primary|secondary} "IP address"

• Use the "primary" command to configure a primary WINS server IPv4 address.

• Use the "secondary" command to configure a secondary WINS server IPv4 address.

• Do not use "255.255.255.255" as the IPv4 address.

You can specify the NBT scope ID.

msh> wins "interface_name" scope "scope ID"

• The scope ID can be entered using up to 31 alphanumeric characters.

• Be sure to specify the interface.

• wlan can be specified only when the wireless LAN interface unit is installed.

  Interface name	Interface configured
  ether	Ethernet interface
  wlan	Wireless LAN interface