Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
Use the "dhcp" command to configure DHCP settings.
View settings
The following command displays the current DHCP settings.
msh> dhcp
Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
Click {on} to enable DHCP. Click {off} to disable DHCP.
If the DNS server address and domain name are obtained from DHCP, be sure to click {on}.
wlan can be specified only when the wireless LAN interface unit is installed.
Interface name |
Interface configured |
|---|---|
ether |
Ethernet interface |
wlan |
Wireless LAN interface |
Current interface priority configuration display
msh> dhcp priority
Interface priority configuration
msh> dhcp priority "interface_name"
You can select which interface has DHCP parameter priority.
Priority settings are available when multiple interfaces are installed.
DNS server address selection
msh> dhcp dnsaddr {dhcp | static}
Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user.
To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static".
Domain name selection
msh> dhcp domainname {dhcp | static}
Specify whether to obtain the domain name from the DNS server or use the domain name set by a user.
To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static".
 |
 | Copyright (C) 2009 |
