autonet

The following command displays the current AutoNet settings:

msh> autonet

You can configure AutoNet settings.

msh> autonet {on|off}

• {on} means "active" and {off} means "inactive".

msh> autonet priority

msh> autonet priority "interface_name"

• You can give interface's AutoNet parameter priority.

• Priority settings are available when multiple interfaces are installed.

• wlan can be specified only when the wireless LAN interface unit is installed.

  Interface name	Interface configured
  ether	Ethernet interface
  wlan	Wireless LAN interface

  

  • If an interface is not selected, the current interface connection settings remain in effect.

  • For details about AutoNet, refer to autonet parameters.