Skip header
ManualsContentsPreviousNextHelp

Printing a Hold Print file

The following procedure describes how to print a Hold Print file with the PCL 6/PCL5e or PostScript 3 printer driver.

Important

  1. Configure Hold Print in the printer driver's properties.

    For details about configuring the printer drivers, see the relevant Help files.

  2. Click [Details...], and then enter a User ID in the [User ID:] box.

    You can also set a file name. The file name you set will be displayed on the printer's Job List screen.

  3. Start printing from the application's Print dialog box.

    The Hold Print job is sent to the printer and stored.

  4. On the printer's control panel, press [Prt.Jobs].

    Operation panel screen illustration

  5. Select [Hold Print Jobs] using the [Down arrow key ] or [Up arrow key ] key, and then press [Job List].

    Operation panel screen illustration

    A list of Hold Print files stored in the printer appears.

    Depending on the security settings, certain print jobs may not be displayed.

    You can print files also by pressing [User ID].

  6. Select the file you want to print using the [Down arrow key ] or [Up arrow key ] key, and then press [Print].

    Operation panel screen illustration

    The confirmation screen appears.

  7. Press [Print].

    The Hold Print file is printed.

    To cancel printing, press [Cancel].

Note

Reference