Skip header
ManualsContentsPreviousNextHelp

Installing the PostScript 3 printer driver (TCP/IP)

Important

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

    Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.

  3. Select an interface language, and then click [OK].

    The default interface language is English.

    The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

  4. Click [PostScript 3 Printer Driver].

    Add Printer Wizard starts.

    Step 5 does not apply for Windows Vista users.

  5. Click [Next >].

  6. Click [Local printer] or [Local printer attached to this computer.], and then click [Next >].

    If you are using Windows Vista, you do not need to click [Next >].

  7. Click [Create a new port:].

  8. Click [DeskTopBinder - SmartDeviceMonitor for Client], and then click [Next >].

  9. Click [TCP/IP], and then click [Search].

    A list of printers using TCP/IP appears.

  10. Select the printer you want to use, and then click [OK].

    Only printers that respond to a broadcast from the computer appear. To use a printer not listed here, click [Specify Address], and then enter the IP address or host name of the printer.

  11. Check that the name of the printer whose driver you want to install is selected, and then click [Next >].

  12. Change the printer name if you want, and then click [Next >].

    Select the [Yes] check box to configure the printer as default.

    Step 13 does not apply for Windows Vista users.

  13. Specify whether or not to share the printer, and then click [Next >].

  14. Specify whether or not to print a test page.

    If you are using other than Windows Vista, click [Next >].

  15. Click [Finish].

    The printer driver installation starts.

Note