Skip header
 

Top Page > Software Guide > Appendix > Printing Files Directly from Windows > Setup

Setup

Follow the procedure below to make network environment settings.

1Enable TCP/IP with the control panel, and then set up the printer's network environment about TCP/IP including IP addresses.

TCP/IP of the printer is set as default.

2Install a TCP/IP in Windows to set up the network environment.

Consult the administrator for the local setting information.

3To print under Windows 2000/XP/Vista or Windows Server 2003/2003 R2/2008, install "Printing service for UNIX" as the network application.

Note

  • For details about setting up IPv4 address, see "Configuration", Hardware Guide.

  • For details about setting the IPv4 address of the printer using DHCP, see "Using DHCP".

Reference