Current Printer Status

• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp" and "sftp" parameters.

  Rsh/rcp cannot be used under Windows Vista and Windows Server 2008.

• mshell: Use the "status" command.

  Messages	Description
  Adjusting...	The printer is initializing or calibrating.
  Call Service Center	There is a malfunction in the printer.
  Canceling Job...	The job is being reset.
  Cannot Eject Original Through	The original cannot be ejected.
  Cannot multi-install: SD Card	The SD card has been configured using another device.
  Configuring...	Setting is being changed.
  Cover Open: Duplex Unit	The cover of the duplex unit is open.
  Cover Open: Exit/Rear Cover	The exit/rear cover is open.
  Cover Open: Front Cover	The front cover is open.
  Cover Open: Paper Exit Cover	The paper exit cover is open.
  Current Job Suspended	Current jobs are suspended.
  Energy Saver Mode	The printer is in Energy Saver Mode.
  Envelope Setting Error: None	The envelope lever is raised but envelope printing is not selected.
  Envelope Setting Error: Others	The envelope lever is lowered but envelope printing is selected.
  Error: DIMM Value	A memory error occurred.
  Error: Ethernet Board	An Ethernet board error has occurred.
  Error: HDD Board	A hard disk board error has occurred.
  Error: Media Link Board	An error has occurred on the file format converter.
  Error: Optional Font	An error has occurred in the font file of the printer.
  Error: Optional RAM	An error has occurred in the SDRAM module.
  Error: Parallel I/F Board	An error has occurred in the parallel interface.
  Error: PDL	An error has occurred in the page description language.
  Error: Rem. Certificate Renewal	An error has occurred in the remote certificate renewal.
  Error: USB Board	An error has occurred in the USB interface board.
  Error: USB Interface	An error has occurred in the USB interface.
  Error: Wireless Board	An error has occurred in the wireless LAN board.
  Full: Log Data Capacity	Log data capacity is full.
  Full: Standard Tray	Stacker tray is full.
  Hex Dump Mode	It is a hex dump mode.
  Independent-supplier Toner	Toner that is not recommended is set.
  In Use: Input Tray	The input tray is being used by other functions.
  Jobs Suspended	All jobs are suspended.
  Log Data Transfer failed	Log transfer has failed.
  Malfunction: Output Tray	There is a problem with the output tray.
  Mismatch: Paper Size	The identified paper tray does not contain paper of the selected size.
  Mismatch: Paper Size and Type	The identified paper tray does not contain paper of selected size and type.
  Mismatch: Paper Size/Image Size	The identified paper tray does not contain paper that matches the image size.
  Mismatch: Paper Type	The identified paper tray does not contain paper of the selected type.
  Near Replacing: Develop. Unit K	Prepare a new development unit (black).
  Near Replacing: Fusing Unit	Prepare a new fusing unit.
  Near Replacing: Int. Transfer	Prepare a new Transfer Roller.
  Near Replacing: Print Cartridge	Prepare a new print cartridge.
  Nearly Full: Log Data Capacity	Log data capacity is nearly full.
  No Paper: Selected Tray	There is no paper in specified tray.
  No Paper: Tray 1	There is no paper in tray 1.
  No Paper: Tray 2	There is no paper in tray 2.
  No Paper: Tray 3	There is no paper in tray 3.
  Not Detected: B2 Lever	B2 lever is not correctly set.
  Not Detected: Duplex Feed Unit	The duplex feed unit is not correctly set.
  Not Detected: Duplex Unit	The duplex unit is not correctly set.
  Not Detected: Fusing Unit	The fusing unit is not correctly set.
  Not Detected: Input Tray	The paper feed tray is not correctly set.
  Not Detected: Print Cartridge	The paper print cartridge is not correctly set.
  Not Detected: Tray 1	Tray 1 is not correctly set.
  Not Detected: Tray 2	Tray 2 is not correctly set.
  Not Detected: Tray 3	Tray 3 is not correctly set.
  Offline	Printer is offline.
  Operating Thermo-range Error	The ambient temperature is outside the temperature range specified for the printer operation.
  Paper Misfeed: Duplex Unit	The paper has jammed in the duplex unit.
  Paper Misfeed: Input Tray	The paper has jammed in the input tray.
  Paper Misfeed: Internal/Output	The paper has jammed inside the printer.
  Paper Misfeed: Output Tray	The paper has jammed in the output tray.
  Printing...	Printing is in progress.
  Proxy Address/Port Incorrect	Proxy address or Port No. is incorrect.
  Proxy User/Password Incorrect	Proxy user name or Password is incorrect.
  RC Gate Connection Error	Connection with the RC Gate failed.
  Readjusting...	The printer is readjusting itself.
  Ready	The printer is ready to print.
  Renewing Remote Certificate	Remote Certificate is Renewing.
  Replace Charger Kit	It is time to replace the charger kit.
  Replace Cleaning Web	It is time to replace the Cleaning Web.
  Replace Develop. Unit (Black)	It is time to replace the development unit (black).
  Replace Fusing Unit	It is time to replace the fusing unit.
  Replace Maintenance Kit	It is time to replace the Maintenance Kit.
  Replace PCU	It is time to replace the photoconductor unit.
  Replace Print Cartridge	It is time to replace the print cartridge.
  Reset IPDS fonts	The IPDS fonts are being reset.
  SD Card Authentication failed	SD card authentication failed.
  SD Card not inserted	The printer is waiting for SD card.
  Supplies Order Call failed	The supply order call has failed.
  Tray Error: Chaptering	The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing.
  Tray Error: Duplex Printing	Selected paper tray cannot be used for duplex printing.
  Warming Up...	The printer is warming up.