autonet
Use the "autonet" command to view and configure AutoNet parameters.
View settings
The following command displays the current AutoNet settings:
msh> autonet
Configuration
You can configure AutoNet settings.
msh> autonet {on|off}
{on} means "active" and {off} means "inactive".
Current interface priority configuration display
msh> autonet priority
Interface priority configuration
msh> autonet priority "interface_name"
You can give interface's AutoNet parameter priority.
Priority settings are available when multiple interfaces are installed.
wlan can be specified only when the wireless LAN interface unit is installed.
Interface name
Interface configured
ether
Ethernet interface
wlan
Wireless LAN interface
If an interface is not selected, the current interface connection settings remain in effect.
For details about AutoNet, refer to autonet parameters.
