Skip header
 

Proceeding with Printing using the Bypass Tray

If you select [Any Size/Type] for the bypass tray, a warning message will appear whenever the paper fed from the source tray does not match the size or type specified in the print job.

When this warning message appears, check the size of the loaded paper and do the following.

Operation panel screen illustration

1Load paper of the size/type indicated in the message onto the bypass tray.

2Press [Continue].

Printing resumes from the page in which the error occurred.

Note

  • The warning message might not appear, depending on the paper size specified in the printer driver.

  • Any changes made to the paper size and type settings will not be applied to the job that is currently in process.

  • To apply changes to the paper settings, cancel the job, and then print it again.

  • For details about [Any Size/Type], see "Specifying Printer Driver or Print Command Priority" and "Print Settings Menu".