Installing the PCL printer driver (TCP/IP)

Quit all applications currently running.

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.

Select an interface language, and then click [OK].

The default interface language is English.

Click [PCL Printer Driver].

The software license agreement appears in the [License Agreement] dialog box.

After reading the agreement, click [I accept the agreement.], and then click [Next >].

Select the printer driver you want to use in the [Select Program] dialog box.

You can select several printer drivers.

The PCL6 printer driver is installed in the language specified by your operating system.

Click [Next >].

Select the printer model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name' ] box.

Double-click the printer name to display the printer settings.

The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.

Click [Port], and then click [Add].

Click [SmartDeviceMonitor], and then click [OK].

Click [TCP/IP], and then click [Search].

A list of printers using TCP/IP appears.

Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use a printer not listed here, click [Specify Address], and then enter the IP address or host name of the printer.

Check that the port of the selected printer is displayed in [Port].

Set a user code, if necessary.

Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].

Installation starts.

After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].