ManualsContentsPreviousNext |
Configuration:
Desktop
Print Process:
Laser beam scanning & Electrophotographic printing
Dualcomponent development
First Print Speed:
6.8 sec or less (A4)
Printing Speed:
Maximum 35 pages per minute (A4)
Resolution:
1,200 × 1,200 dpi (RPCS, PostScript 3, PCL 6)
600 × 600 dpi (RPCS, PostScript 3, PCL 5e/6)
300 × 300 dpi (RPCS, PostScript 3, PCL 5e)
Paper size:
Paper Weight:
Media Type:
Paper Output Capacity:
Standard 500 sheets (75 g/m2, 20 lb.)
Paper Input Capacity:
Standard Paper Tray |
500 sheets *1 |
Bypass Tray *3 |
100 sheets *2 |
Optional Paper Feed Unit |
500 sheets × 2 *1 |
Optional Envelop Feeder Unit *4 |
60 sheets *1 |
*1 Paper weight: 60 - 216 g/m2 (16 - 57 lb.)
*2 Paper weight: 52 - 216 g/m2 (14 - 57 lb.)
*3 You can load up to 10 envelopes (52 - 216 g/m2, 14 - 57 lb.) at the same time.
*4 To use the envelope feeder unit, the optional paper feed unit is required. The paper tray of the feed unit can be replaced with the envelope feeder unit. For more information about envelopes, see Types of Paper and Other Media.
Power Source:
220 - 240 V, 4.5 A or more, 50/60 Hz
120 V, 8.4 A or more, 60 Hz
Power Consumption:
Printing |
940 W or less |
Energy Saver |
3.9 W or less |
Printing |
880 W or less |
Energy Saver |
3.9 W or less |
Dimensions:
Width |
Depth |
Height |
|
---|---|---|---|
Printer only (Bypass Tray not extended) |
478 mm (18.9 ") |
410 mm (16.2 ") |
404 mm (15.9 ") |
Printer only (Bypass Tray extended) |
478 mm (18.9 ") |
437 mm (17.3 ") |
404 mm (15.9 ") |
Printer with paper feed unit (one optional) |
478 mm (18.9 ") |
410 mm (16.2 ") |
533 mm (20.9 ") |
Printer with two optional paper feed unit |
478 mm (18.9 ") |
410 mm (16.2 ") |
661 mm (26.0 ") |
Weight:
Approximately 22.5 kg (49.6 lb.) (power cord included)
Noise Emission *1 :
Sound Power Level : Main frame only
Stand-by |
40 dB (A) |
During Printing |
67 dB (A) |
Sound Pressure level : Main frame only *2
Stand-by |
30 dB (A) |
During Printing |
55 dB (A) |
*1 The preceding measurements made in accordance with ISO7779 are actual values.
*2 Measured at the position of a bystander.
Memory:
Standard 256 MB, up to 512 MB (with the optional Memory Unit)
Interface:
Standard:
Ethernet (10BASE-T/100BASE-TX)
USB 2.0, USB Host
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
Optional:
Wireless LAN (IEEE 802.11a/b/g)
Gigabit Ethernet (1000BASE-T)
Parallel (Bidirectional IEEE1284)
Printer Language:
RPCS, PCL 5e/6, PostScript Level 3, PDF
Fonts:
PCL 5e/6
45 fonts, 13 International fonts
PostScript 3, PDF
80 fonts (Type 2:24, Type 14:112)
If the printer has not been used for a while, there may be a short delay before the first page starts printing.
Continuous printing on sheets with a width of 170 mm or smaller may decrease the printing speed depending on the temperature control of the fusing unit.