Plain Paper

Paper thickness

60 - 105 g/m² (16 - 28 lb.)

Printer setup

Make the following setting using the control panel:

Select [Paper Input] [Paper Type: (tray name)] [No Display (Plain Paper)].

Printer driver setup

Click [Plain (60 to 105 g/m²)] or [Plain & Recycled] in the "Paper Type:" list.

Enabled paper feeding tray

Any input tray can be used.

Number of sheets that can be set

Tray 1: 500

Tray 2, Tray 3 (Paper Feed Unit): 500

Bypass Tray: 100

• Make sure paper is not stacked higher than the upper limit mark () inside the tray. Make sure paper is not stacked higher than the paper guides inside the bypass tray.

Both-sided printing

Possible

Additional cautions

When printing on 91 - 130 g/m² paper, print speed is slightly slower to when printing on paper of 60 - 91 g/m².