Configuring IEEE 802.1X (WPA/WPA2)

WPA/WPA2 uses an authentication server to provide greatly enhanced security compared to WPA-PSK/WPA2-PSK

IEEE 802.1X (WPA/WPA2) can be configured using Web Image Monitor's administrator mode.

To configure the settings when using Ethernet; select [Host Interface] and [IEEE802.1X Auth.(Ethernet)] in [Network] on the display, and then select [Active].

To configure the settings when using a wireless LAN; configure WPA using the control panel or Web Image Monitor.

To set WPA/WPA2 for the wireless LAN, you must enable SSL.
To set WPA/WPA2 for the wireless LAN, you must use Web Image Monitor.