Ethernet Configuration

Configure the following network settings according to the network environment using the control panel.

The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu.

Setting Name	Default
Machine IPv4 Address	DHCP: On IPv4 Address: 11.22.33.44 Subnet Mask: 0.0.0.0 Gateway Address: 0.0.0.0
IPv6 Stateless Setting	Active
IPsec	Inactive
NW Frame Type	Auto Select
Effective Protocol	IPv4: Active IPv6: Inactive NetWare: Inactive SMB: Active AppleTalk: Inactive
Ethernet Speed	Auto Select
IEEE802.1X Auth.(Ethernet)	Inactive
Restr.IEEE802.1X Auth.Def.	-
LAN Type	Ethernet

If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.
If the printer is already placed on a TCP/IP-capable environment, you can also use a Web browser to configure the IP address-related settings.