Skip header
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Connecting the Printer Cables > Ethernet Cable Connection > Reading the LED Lamps

Reading the LED Lamps

For the standard Ethernet port

Standard ethernet port illustration

  1. Indicator (yellow)

    Lights up yellow when 100 BASE-TX is in operation. Goes off when 10 BASE-T is in operation.

  2. Indicator (green)

    Lights up green when 10 BASE-T is in operation. Goes off when 100 BASE-TX is in operation.

For the Gigabit Ethernet board

Gigabit ethernet board illustration

  1. Indicator (green)

    When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating, it is turned off.

  2. Indicators (both green and yellow)

    When 1000BASE-T is operating, both LED are lit.

  3. Indicator (yellow)

    When 100BASE-TX is operating, the LED is lit yellow. When 10BASE-T is operating, it is turned off.

TopPreviousNext
Copyright (C) 2009