Skip header
 

Top Page > Hardware Guide > Paper and Other Media > Paper Recommendations > Loading Paper

Loading Paper

Important

  • Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper misfeed.

  • When printing on OHP transparencies that have a print side, load them with the print side facing up on the bypass tray. Not taking this precaution may cause them to stick to the fusing unit and cause misfeeds.

  • Set the paper as described below.

    • Tray 1: Print side facing down

    • Bypass Tray: Print side facing up

    • Paper Feed Unit (Tray 2, Tray 3): Print side facing down

  • Print quality cannot be guaranteed if paper other than the ones recommended is used. For more information about recommended paper, contact your sales or service representative.

  • Do not use paper that has already been printed onto by other printers.