Adding the Fusing Oil

This section describes how to add the fusing oil.

The inside of this machine gets very hot. To avoid burns, do not touch parts labelled "hot surface".
To avoid fire and burns, keep the fusing oil unit away from naked flames and other heat sources.

Press the [Counter] key, and then print out the counter list.
Spread the provided mat over the floor area in front of the machine's left front cover.
Open the left front cover.
Grip the fusing oil inlet, and then pull it toward you, but not fully out.
Remove the cap of the oil bottle.
Carefully pour the fusing oil into the fusing oil inlet.
Stop pouring when the fusing oil reaches the upper marking.
Slide the fusing oil inlet back into the machine.
Close the left front cover.