



	Manuals Contents Previous Next

Top Page > Troubleshooting > When the Machine Does Not Operate As Wanted > Pausing Print When Using the Finisher

Pausing Print When Using the Finisher

You can pause a large volume of print when using the Finisher.

Press the [Suspend/Resume] key.
The key lights up.
Remove the stack of paper from the finisher shift tray.
Press the [Suspend/Resume] key.
The key turns off, and then printing restarts.

You can suspend printing only when the output tray is specified as the finisher shift tray.
Depending on the print image, the prints might not be stacked properly. In such a case, pause printing, remove the prints, and then resume printing.